Some have separate screens where you define a service.
Use this subnet mask (typically 255.255.255.0) and default gateway (the IP address of the router).
For an IP address, use the first 3 sets of numbers and chose a higher number up to 253 for the last, for example, if it’s 192.168.1.12, you can use an IP address like 192.168.1.100.
The problem with this is that it’s likely that this address will change next time turn off and then back on the router or camera.
The first step is to set a fixed address on the camera so that it doesn’t change and you can always find it.
Some cameras have 2 way audio, so you can even talk to the person or pet. We all know that if we go to a certain IP address on our home browser, we can configure and view the camera, but how do we do the very same thing when we are not home.
STEP 1 There’s several steps into making this work, so it’s best to start at the camera. Downloads Place in the same folder of cygwin dlls and configuration files.Remember to update the cygwin dlls and use the ones provided here because they are from the enviroment where oscam was compiled.In the DOS window, enter the command “ipconfig”, on a MAC enter the command “ifconfig”.You will see the IPv4 address, the subnet mask and the default gateway.Then you use a program the vendor provided on a CD that finds the IP address assigned to the camera.